
Seal lanai travertine without harming the stone
Travertine Sealing in Celebration, FL
Call (689) 888-6994 for a free estimate to seal travertine around your Celebration pool or lanai.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Can someone seal the travertine at my Celebration home, and how soon will I hear back?
Yes, a local contractor can clean and seal travertine at homes across Celebration, FL, and an answer reaches you by the next business day, often the same day. The estimate is free and booking is your call. To start the conversation, call (689) 888-6994.
Travertine is natural stone, so the cleaner, the sealer and the finish follow different rules than they do for concrete pavers. A contractor who works with stone can match the product to the surface and tell you whether a coat is worth it at all. To describe your floor and ask, book a free look at them.
Paver Sealing Celebration Is Proud to Serve Central Florida

Why does travertine need different care than concrete pavers?
Travertine is a calcium-based stone with natural pores, and that changes what is safe to put on it. A travertine company in Orlando says acidic products can etch calcium-based stone and permanently damage polished or honed finishes. A concrete paver cleaner is not automatically a stone cleaner. To ask a contractor how they tell the two apart, call (689) 888-6994.
Is sealing travertine even necessary?
A stone supplier's guide calls sealing a choice and says unsealed stone is fine with a compatible cleaning routine. It points to patios and pool decks used for entertaining as places where owners often want one. A pool deck guide adds that unsealed travertine is more prone to chlorine staining, algae in damp areas and surface wear. If you are weighing it, book a free look at them.
What will a sealer not do?
The same supplier says a sealer lowers how much liquid the stone soaks up, but it does not make stone stain-proof, acid-proof or maintenance-free. That is worth hearing before you pay for a coat. A good contractor sets that expectation up front, and you can hear it by phone at (689) 888-6994.
Why do cleaners matter as much as the sealer?
Cleaning comes first, and the wrong product can damage the stone before any sealer goes on. The Orlando travertine company recommends pH-neutral cleaners and non-abrasive methods. Ask the contractor to name the cleaner on the estimate when you book a free look at them.
Which sealer is right for travertine around a Celebration pool?
Most guides and local companies point the same way: a penetrating sealer. It soaks into the stone and keeps the natural texture, and a pool deck guide calls it the recommended choice for pool decks. A Central Florida company says limestone needs a penetrating sealer, not a film that coats the surface. To hear which one a contractor would pick, call (689) 888-6994.
Why not a film that sits on the surface?
A pool deck guide says film-forming sealers are generally not recommended around pools, and an Orlando paver company warns that a topical film on natural stone can turn slippery and peel. A peeling film also has to be stripped before anything new goes on. If a bid names a glossy topical coat for stone, book a free look at them and ask why.
Water-based or solvent-based?
The pool deck guide says water-based products have lower odor and easier cleanup, while solvent-based products penetrate more deeply and need more ventilation. If the deck sits inside a screen cage, ask about ventilation. Raise it when you call (689) 888-6994.
What changes for a salt water pool?
The same guide says salt water pools call for a sealer designed to resist salt-related wear, because salt can be hard on natural stone over time. Tell the contractor what kind of pool you have when you book a free look at them.
Will sealing make my travertine slippery?
It should not, with the right product and finish. A pool deck guide says penetrating sealers generally preserve a stone's traction. It also says tumbled and brushed travertine grips better than honed travertine, which may be slick when wet. To have a contractor look at your finish, call (689) 888-6994.
Does a shiny finish belong on a pool deck?
A stone supplier's guide warns not to assume extra sheen suits a pool deck and suggests checking wet-area performance with the installer. Treat a wet look offer around water with care. Ask for a test patch when you book a free look at them.
What is a non-slip additive?
A Central Florida company recommends non-slip additives for sealer around travertine pool areas and says they add only a little to the cost. Whether your contractor offers one is a fair question for (689) 888-6994.
Do Celebration's review rules cover a lanai or pool deck?
The town's design guidelines page says applications are still required for exterior changes to a home, and the review committee meets once a month. It lists guidelines for pools, spas and screen enclosures, and for patios, walkways and porch tile or pavers. It does not say what they require, and it never mentions sealing. To plan around a monthly meeting, call (689) 888-6994.
A cleaning and a clear penetrating coat leave the look close to what you have, so the question may be short. A change in color or sheen is the one to raise with Town Hall before you book. To line up a contractor while you ask, book a free look at them.
How often should travertine be resealed in Florida?
A travertine company in Orlando says most sealers last between 1 and 5 years, and that pool decks need resealing more often than indoor floors. It points to humidity, frequent rain and constant moisture as the reasons. Celebration gets the same weather, so plan on the short end for a deck beside the pool. For an inspection, call (689) 888-6994.
What do the numbers look like by use?
A pool deck guide puts heavy-use pools at roughly 1 to 2 years for many penetrating sealers and 2 to 3 for higher grade ones. It puts lightly used areas at about 3 to 5. A deck with daily swimming and a lanai floor that sees a few chairs are different jobs. Describe yours when you book a free look at them.
What is the water bead check?
The guide suggests an inspection each year and a water bead check in between. If water soaks in quickly instead of beading, it is time to reapply. A contractor can run that check in a minute at the visit, so ask when you call (689) 888-6994.
What does travertine sealing cost in Celebration?
No Celebration company publishes a travertine sealing rate, so the table builds one from the pieces that exist. An Orlando paver company lists natural stone at $2.00 to $3.50 per square foot, and Central Florida companies list pool decks at $1.75 to $3.00. One company applies a $1,000 minimum per project. For a figure written for your stone, book a free look at them.
A published Orlando travertine total runs from $704 to $2,212, and that company says size, condition, stain removal, grout condition, honing or restoration and the sealer chosen all move the number. Etched or stained stone sits higher in that range. Holding a bid already? Call (689) 888-6994 and set it beside these figures.
| Stone area | Natural stone rate, $2.00 to $3.50 a sq ft | Concrete paver rate, $1.50 to $3.00 a sq ft |
|---|---|---|
| 300 sq ft lanai floor | $600 to $1,050 | $450 to $900 |
| 600 sq ft pool deck | $1,200 to $2,100 | $900 to $1,800 |
| 1,000 sq ft pool deck and patio | $2,000 to $3,500 | $1,500 to $3,000 |
| 1,500 sq ft wrap-around deck | $3,000 to $5,250 | $2,250 to $4,500 |
The middle column multiplies the $2.00 to $3.50 per square foot an Orlando paver company lists for natural stone, which includes specialized cleaning and an impregnating sealer. The last column multiplies the $1.50 to $3.00 that Central Florida companies publish for concrete pavers, shown only for comparison. A published Orlando travertine total runs $704 to $2,212, and one company applies a $1,000 minimum. Prices read November 2026, and the quote for your stone may differ.

What goes wrong with travertine in Celebration?
Five problems send most owners to the phone: etch marks, stains, dark growth in damp joints, a worn sealer and damage that has gone deeper than the surface. Each has a different fix. To ask which one you have, call (689) 888-6994.
1. Etch marks
Acid dulls calcium-based stone. Sealing does not undo it, and an Orlando stone company lists grinding for etch removal as its own service.
2. Stains sealed in
A pool deck guide says never to seal over visible stains, because the coat locks them in. Stains come out first.
3. Dark growth in damp joints
Humidity feeds algae and mold, an Orlando paver company says, and the pool deck guide lists algae among the problems of unsealed travertine.
4. Water soaks in
When drops soak in instead of beading, the coat is spent. A fresh penetrating coat follows a clean and dry surface.
5. Deep staining or flaking
The same guide says deep staining, spalling or heavy erosion may need restoration before any sealer.
What is the travertine sealing process, step by step?
The travertine sealing process runs in six steps, and none of them can be skipped. A coat applied to damp or stained stone traps the problem. To get on the calendar, call (689) 888-6994.
1. Look over the stone
The contractor measures the area and notes etching, stains, loose grout or joints, and old sealer.
2. Clean with stone-safe products
pH-neutral cleaners and non-abrasive methods, as the Orlando travertine company recommends.
3. Deal with stains first
Visible stains are treated before sealing, since a coat locks them in.
4. Dry and test
The stone dries fully, then a water bead check shows whether it is ready.
5. Apply the penetrating sealer
Applied with the tool and amount the product calls for, with extra wiped off on time.
6. Cure and walk the area
Everyone stays off during the cure, and the contractor writes down the product and the date.
What should I ask before I hire someone to seal travertine?
A short list of questions sorts out most of the risk. Put them to every contractor and compare the answers side by side. To start collecting answers, book a free look at them.
Which product, and is it penetrating?
Ask for the product name and type. A stone supplier suggests recording the product name and application date, which helps when it is time to reseal. A contractor who gives a clear answer is easy to compare. For yours, call (689) 888-6994.
What is in the price?
Look for the cleaning, stain work, joint work and sealer on separate lines, with the square footage measured at the visit. A free written estimate with real square footage is how one Florida company describes its process. Ask for the same when you book a free look at them.
Where does the rinse water go?
Celebration's stormwater page says ponds and drains form one connected network and that only rain belongs down the drain. Ask how cleaner and rinse water stay out of the drains. You can put it to a contractor by calling (689) 888-6994.
What does sealed travertine look like around Celebration?








Frequently Asked Questions
Is it necessary to seal pavers in Florida?
For travertine it is a choice, and a stone guide says so plainly. A pool deck guide adds that unsealed travertine is more prone to chlorine staining, algae in damp spots and surface wear, which is why many Celebration pool owners ask a contractor about it. Ask what the sealer will and will not do before you book.
Why is paver sealing so expensive?
Most of the price is the prep. An Orlando paver company lists natural stone at $2.00 to $3.50 per square foot because the price covers specialized cleaning and an impregnating sealer, not only the coat. One Central Florida company also sets a $1,000 minimum per project. Ask for the cleaning, the sealer and any stain work on separate lines.
What is the average cost to seal pavers in Florida?
Central Florida companies publish about $1.50 to $3.00 per square foot for concrete pavers in 2026, and an Orlando company lists natural stone such as travertine at $2.00 to $3.50. A published Orlando travertine total runs from $704 to $2,212 depending on size and condition.
Is there a downside to sealing pavers?
Three. A film-forming sealer on natural stone can turn slippery and peel, according to an Orlando company. A sealer does not make stone stain-proof or acid-proof, and the coat has to be renewed, often within 1 to 5 years. A contractor who uses a penetrating product avoids the first problem.
Can a contractor seal my Celebration pool deck travertine without making it slippery?
Often yes. A pool deck sealing guide says penetrating sealers generally keep a stone's traction, while honed stone may be slick when wet. A Central Florida company recommends a non-slip additive near travertine pools. Ask the contractor which product and finish they plan to use, and ask for a test patch.
How often will my Celebration travertine need to be resealed?
A travertine company says most sealers last 1 to 5 years, with pool decks needing more frequent resealing. A pool deck guide puts heavy-use decks at roughly 1 to 2 years for many penetrating sealers and lightly used areas at 3 to 5. Water that soaks in instead of beading is the sign to call.
Does Celebration's review committee need to approve sealing my lanai or pool deck?
Check with Town Hall. The town's design guidelines page says applications are still required for exterior changes and that the committee meets once a month. It lists guidelines for pools and screen enclosures but does not say what they require, and it never mentions sealing. A change in sheen is worth asking about.
Can a contractor take out etch marks before sealing travertine?
Etch removal is its own job. One Orlando stone company lists grinding for etch removal and honing as separate services from sealing, and a stone guide warns that acid can still etch carbonate stone after sealing. Ask whether etch repair is in your quote or priced apart.
How do I know a contractor will use a stone-safe cleaner on my travertine?
Ask for the cleaner by name. A travertine company says acidic products can etch calcium-based stone and recommends pH-neutral cleaners with non-abrasive methods. A contractor who cannot say what goes on the stone, or who plans an acid wash, is the wrong fit.
Ready to protect your Celebration stone?
Describe the floor and the pool, and a local contractor answers by the next business day, often the same day.
Free, no obligation
